CIMS论文的天地

 

Fabrication of enclosed nanochannels in poly(methylmethacrylate) using proton beam writing and thermal bonding

注意:本论文已在APPLIED PHYSICS LETTERS 88, 093515,2006发表
使用者请注明论文出处

P. E. Shao(邵培革), A. van Kan, L. P. Wang, K. Ansari, A. A. Bettiol, and F. Watt
Center for Ion Beam Applications (CIBA), Physics Department, National University of Singapore,
2 Science Drive 3, Singapore 117542, Singapore

Abstract: We report a technique for fabricating enclosed nanochannels in polymethylmethacrylatePMMA using proton beam writing coupled with thermal bonding. Using proton beam writing, straight-walled high-aspect-ratio channels can be directly fabricated through a relatively thick PMMA resist layer spin coated on a Kapton film. By thermally bonding the fabricated structures onto bulk PMMA, peeling off the Kapton substrate, and bonding the remaining exposed side to PMMA, enclosed high-aspect-ratio nano/microchannels can be fabricated. Such enclosed channels can be incorporated into fluidic polymeric devices, and the process is compatible with the fabrication of multilevel three-dimensional fluidic chips with vertical interconnects.

 

1浏览PDF格式全文需要使用软件--Abode Acrobat(由于软件较大并常见,我站不提供下载)

2、下载论文全文请点击鼠标右键“另存为”或使用网络蚂蚁下载(261KB)


本站收录的本文作者的其他论文

1、微机械元件和仪器新进展

2、纵弯式压电微电机研究

3、Polymer micro piezo valve with a small dead volume

4、Dosing system for the nanolitre range,fabricated with the AMANDA process

5、Proton beam fabrication of nickel stamps for nanoimprint lithography

 更多相关论文请点击本站的<<<站内全文搜索>>>查找

欢迎您参加讨论,发表您对此论文及其研究领域的看法!
(请在发言时在标题中使用所点评的论文的题目或研究方向,这样方便大家浏览!)

返回首页 | CIMS论文 | 并行工程 | 虚拟制造 | 敏捷制造 | 其他论文 | 项目开发 | 学术资源 | 站内全文搜索 | 免费论文网站大全 |

line.gif (4535 字节)

为了更好的为大家服务,欢迎您参加本站的投票调查

>>>>参加更多投票调查请点击!

本站永久域名:http://www.cimspaper.com欢迎访问

注意:本站内容未经书面允许不得转载

All rights reserved, all contents copyright 2000-2019
本站自2000年3月总网页访问量为