CIMS论文的天地


敏捷制造

 


⊙第1篇⊙

分布式网络化研究中心及其在敏捷制造中的应用
观看全文请点击上面的链接
注意:本文在《机械与电子》(1999,5:15~18)杂志发表,
使用者请注明文章出处

陈晓川 刘晓冰 张暴暴 冯辛安
(大连理工大学CIMS中心,大连,116023)

内容摘要:计算机技术、网络技术和信息技术的发展为分布式网络化研究中心的诞生创造了技术条件,本文结合我国国情,分析了分布式网络化研究中心的重大作用、体系结构及其在敏捷制造中的应用,希望为我国科研工作的开展做些有益的探索。
关键词:分布式网络化研究中心,敏捷制造,CORBA

Distributed Networked Research Center and Its Application in Agile Manufacturing

Chen Xiao-Chuan, Liu Xiao-Bing, Zhang Bao-Bao ,Feng Xin-An
(Dalian University of Technology, CIMS Centre,116023)

Abstract:With the development of computer, network and information technology, the Distributed Networked Research Center(DNRC) may be established. In this paper, we analyzed the important role of DNRC and its architecture according to Chinese conditions. Then we proposed some applications in agile manufacturing. We hope our work will be beneficial to our manufacturing sector.
keywords: Distributed Networked Research Center, Agile Manufacturing, CORBA


⊙第2篇⊙

制造生产模式的演变与敏捷制造
观看全文请点击上面的链接
注意:本论文已在《工业工程》(1999,2(3):13~17)杂志发表,
使用者请注明文章出处

赵 伟 刘晓冰 许登峰
(大连理工大学CIMS中心,辽宁大连,116023)

摘要:在分析制造生产模式演变的基础上,讨论了生产模式演变的根据和趋势,认为敏捷制造是应关注和利用的生产模式,简要介绍敏捷制造内涵及现状等,并探索了利用敏捷制造思想提高我国制造业敏捷性和竞争力的实施方法。
关键词:生产模式; 敏捷制造; 敏捷性; 动态联盟
中图资料法分类号 F270.7

The Evolution of Manufacturing Production Mode and Agile Manufacturing

Zhao Wei Liu Xiaobing Xu Dengfeng
(CIMS Center of Dalian University of Technology, Dalian, 116023)

Abstract: Abstract This paper analyzes the evolution of manufacturing production mode, discusses the causes and trend of the evolution, and argues agile manufacturing is a desirable mode, then introduces agile manufacturing briefly, studies how to enhance national enterprises’agility and competition by using agile manufacturing.
Key words: Production Mode; Agile Manufacturing; Agility; Virtual Enterprise


⊙第3篇⊙

企业信息化与敏捷制造
观看全文请点击上面的链接
注意:本论文已在《863/CIMSNET建设重庆研讨会》(2000,5)发表,
使用者请注明文章出处
本文来源于CIMSNET重庆研讨会

严隽琪 倪炎榕 马登哲
(上海交通大学机械学院,
200030

摘要随着网络技术的发展,信息不仅已经成为制造产业的决定性因素,而且还是最活跃的驱动因素。在此背景下,本文分析了制造中的信息需求,阐述了制造业信息化现状,提出了敏捷制造网络化工程的具体实施方案及其中的关键技术。
关键词: 信息 敏捷制造 网络

Research On Network-based Agile Manufacturing

Yan Junqi,Ni Yanrong,Ma Dengzhe
(Mechanical Engineering Department, Shanghai Jiaotong University, Shanghai 200030)

Abstract:With the development of network technology, information becomes not only the crucial dominate factor of manufacturing but also the active drive factor of manufacturing. Under the background, this thesis analysis the information demands of manufacturing and clarify the actuality in agile manufacturing .The thesis also bring forward how carry the agile manufacturing scheme into execution. The scheme includes some key technology.
Key Words: Information Agile Manufacturing Network


⊙第4篇⊙

大型复杂产品研制与生产的动态联盟模式
下载论文全文请点击上面的链接
注意:本论文已在《计算机集成制造系统CIMS》(2000,6(5):1-7)杂志发表,
使用者请注明文章出处

赵天奇 陈禹六
(清华大学)

摘要:分析了大型复杂产品设计与生产的特点,以及动态联盟企业的分类及特点,在此基 础上提出了适合大型复杂产品设计、制造、批量生产与产品服务的分阶段动态联盟模式及 其实施方案,并对动态联盟伙伴企业之间的投资和利益分配问题进行了探讨,最后用实际案 例对所提出的模式进行了分析。
关键词:动态联盟;大型复杂产品;产品设计;产品制造;产品服务
中图分类号:TB472;N945.12   文献标识码:A
文章编号:1006-5911 (2000)05-0001-07

Dynamic Alliance Mode for Developing Large-sized and Complex Products

ZHAO Tian-qi, CHEN Yu-liu
(Department of Automation, Tsinghua University,Beijing 100084,P.R.China)

Abstract:Based on the analysis of the designing and production processes of L arge-sized and Complex Product, this paper proposes a relevant multistage dynamic cooperating mode and its implementation schemes according to the research on the characteristics and category of Dynamic Alliance. The problems of the investment and interestassignment of partner enterprises are discussed. Three application cases o f this mode are provided at the end.
Key words: dynamic alliance; large-sized and complex product; product development; product manufacturing; product service


⊙第5篇⊙

业务流程重组的研究与实施
观看全文请点击上面的链接
注意:本论文已在《上海大学学报(自然科学版)》(1999,5(4):333-336)杂志发表,
使用者请注明文章出处

陈云 龚田根 何成利 方明伦
(上海大学 CIMS&机器人中心, 上海 200072)

摘要本文首先介绍业务流程重组的概念、实施方法,并以CIMS实施工厂——上海华通开关厂为例,通过分析企业目前的业务流程,结合管理信息系统的开发和实施,重建企业业务流程,将信息技术和新的管理模式结合起来,使企业摆脱目前的困境.
关键词:业务流程;重建;CIMS
中图分类号:F 406  文献标识码:A

Research and Application of BPR

CHEN Yun, GONG Tian-gen, HE Cheng-li, FANG Ming-lun
(CIMS Center, Shanghai University, Shanghai 200072, China)

Abstract: Some theories and methods on how to carry into execution of BPR are discussed, and an example on Huatong Switch Plant is given. Analyzing current flow, combining development and executing manage information system, reengineering corporation operation's flow, banding together information technology and manage pattern, it is order to get rid of current puzzle of the plant.
Key words: business process; reengineering; CIMS


⊙第6篇⊙

建立面向区域资源共享企业动态联盟体系的研究 
下载论文全文请点击上面的链接
注意:本论文已经在《组合机床与自动化加工技术》(1998,11:43~46)杂志发表
使用者请注明论文内容出处
 
赵伟,刘晓冰 
(大连理工大学CIMS中心,辽宁大连,116023)

摘要: 我国企业市场应变能力差的原因之一是资源的整体落后和不均衡,针对这一问题,本文提出了运用动态联盟思想建立区域企业间的资源联盟,以加强联盟企业的资源实力,从而提高市场竞争力,并给出了实施方法。
关键词: 敏捷制造,动态联盟,制造资源综合利用

Research on league system of enterprise of joint management for zone resources

Zhao Wei Liu Xiaobing
(CIMS Center of Dalian University of Technology, Dalian, 116023)

Abstract: One of the causes lead to national enterprises' bad response to market lies in unbalance and lack of design and manufacturing resources. To solve this problem, this paper proposes a view of resources virtual organization among enterprises in a zone based on the idea of dynamic enterprise organization and gives realization ways.
Keywords: agile manufacturing; dynamic enterprise organization; optimal utilization of manufacturing resources


⊙第7篇⊙

网络化制造环境下的动态企业建模 
下载论文全文请点击上面的链接

注意:本论文已经在《机械工程学报》(2002,38(6):31~35)杂志发表
使用者请注明论文内容出处
 
赵博 范玉顺
(清华大学国家CIMS工程技术研究中心,北京, 100084 )


内容摘要:在分析传统CIMS企业建模局限性的基础上,探讨了网络化制造环境下虚拟企业的动态建模问题,首先研究了虚拟企业模型的构成和特点,特别是对各个视图的来源进行了分析;其次,考察了网络环境下的分布式协同建模过程,讨论了网络化协同建模机制的几个研究内容;然后,建议了一种动态企业建模工具的参考结构,最后,论述了两个重要的技术支持,多企业知识集成和对动态企业模型的性能分析与综合评价。
关键词: 网络化制造 动态企业模型 多企业知识集成 虚拟企业 CIMS

DYNAMIC ENTERPRISE MODELING UNDER NETWORK MANUFACTURING
Zhao Bo , Fan Yushun
(National CIMS Engineering Research Center, Tsinghua University)

Abstract: On the base of analyzing the limitation of modeling of traditional CIMS enterprise, Dynamic modeling for virtual enterprise under network manufacturing is discussed. Firstly, the structure and feature of virtual enterprise model is presented. Creating of all sorts of the views in such model is particularly analyzed. Secondly, the process of distributed and synergic modeling under network is surveyed. Some facets of such mechanism are pointed out. Then a referenced architecture of dynamic enterprise model tools is recommended. Finally, two important technical auspice, multi enterprise knowledge integration and capability analyzing & general evaluation for dynamic enterprise model are discussed.
Key words: Network manufacturing Dynamic enterprise modeling Multi enterprise knowledge integration Virtual enterprise


⊙第8篇⊙

面向企业异地协同设计与制造的MVPN的研究
下载论文全文请点击上面的链接
注意:本论文已经在《机械设计与制造》(2003, 2:107-109)
俞涛,刘丽兰,方明伦
(上海大学CIMS 和机器人中心,上海,200072)

摘要:从企业对异地协同设计与制造的具体要求出发,结合VPN 技术、产品生命周期管理(PLM)技术和制造业信息化技术各自的特点和优势,创造性地提出了面向企业异地协同设计与制造的制造虚拟专用网(MVPN)理论,有效解决了资源共享、数据转换、数据同步以及数据传输安全等瓶颈问题。最后,通过上海大学MVPN(SHU-MVPN)的试运行,验证了该理论的可行性,为制造企业适应激烈的市场竞争和进行产品创新做了一些有益的探索。
关键词:
异地协同设计与制造;虚拟专用网;产品生命周期管理;制造虚拟专用网


⊙第9篇⊙

基于CPC和MVPN的快速设计与制造一体化系统的研究
下载论文全文请点击上面的链接
注意:本论文已经在《组合机床与自动化加工技术》(2002,7:66-68)杂志发表
使用者请注明论文内容出处

刘丽兰1  俞 涛1  施战备2  方明伦1
1. 上海大学CIMS 与机器人中心,上海 200072 ; 
2. 上海大学计算机系,上海 200072

摘要:提出了制造专用网(MVPN) 的概念,然后以上海大学快速制造工程中心为例,建立了基于CPC 和MVPN 的快速设计和制造一体化系统。该系统以CPC 为产品数据和信息的集成平台,以MVPN 为网络的安全保障,有效地解决了快速设计和快速制造中存在的瓶颈问题,进一步拓展了其应用领域,具有一定的理论和实用价值。
关键词:制造专用网(MVPN) ;产品协同商务(CPC) ;快速设计和制造一体化
中图分类号: TP39  文章编号:1001 - 2265 (2002) 07 - 0066 - 03

Research on integrated rapid design and manufacture system based on CPC and MVPN
L IU Lilan, YU Tao, SHI Zhanbei, FAN G Minglun

Abstract:The concept of manufacture virtual private network (MVPN) is brought forward in this article. Then , using SHU Rapid Manufacture Center as the instance , the integrated rapid design and manufacture system based on CPC and  MVPN is established. With CPC as the integrating platform of information and data , MVPN as the physical web - supporting framework ,the system effectively resolves the primary problems in rapid design and manufacture , further extends its application field. This integrated system has far - reaching theoretic and practicing value.
Key words : manufacture virtual private network (MVPN) ;collaborative product commerce (CPC) ;integrated rapid  design and manufacture system

 


 

返回首页 | CIMS论文 | 虚拟制造 | 敏捷制造 | 其他论文 | 项目开发 | 学术资源 | 站内全文搜索 | 免费论文网站大全 |


line.gif (4535 字节)

为了更好的为大家服务,欢迎您参加本站的投票调查

>>>>参加更多投票调查请点击!

本站永久域名:http://www.cimspaper.com欢迎访问

注意:本站内容未经书面允许不得转载

All rights reserved, all contents copyright 2000-2019

本站自2000年3月总网页访问量为