CIMS论文的天地

 

快速制造网格及其服务结点的建设


注意:本论文已经在《机械设计与研究》杂志2003,19(5):57-59发表,使用者请注明论文出处!

刘丽兰1,俞涛1,施战备2,方明伦1
(1.
上海大学 CIMS 与机器人中心,上海 200072 ;2. 上海大学 计算机学院,上海 200072)

摘要:实现资源共享、协同工作、实时动态建立虚拟组织是网络化制造追求的最终目标,也是网格计算的主要功能和特点。作者结合两者提出了制造网格(MG) 的概念,并建立了快速制造网格(RMG) 作为前期研究和试点工程。同时,采用WSDL 描述、服务映射与实现、服务部署等方法,将快速制造资源描述和封装成服务(RMSN) ,解决了制约网格技术向制造业推广的瓶颈,并以应用实例说明了具体的实现方法。
关键词:网络化制造; 网格计算; 制造网格(MG) ; 快速制造网格( RMG) ; 快速制造服务结点( RMSN)

Research on Rapid Manufacturing Grid and Its Service Nodes
LIU Lilan1 ,YU Tao1 ,SHI Zhanbei2 ,FANG Minglun1
(1. CIMS Research Center of Shanghai University , Shanghai
200072 ,China ;2. Computer Department of Shanghai University ,Shanghai 200072 ,China) 

Abstract :The objectives of Network Manufacturing are resource sharing ,collaborative working ,and building virtual organizations dynamically. These objectires are also the main characters of grid. Combining with both Manufacturing Grid(MG) and Rapid Manufacturing Grid ( RMG) as its preresearch ,it is the first time put forward in this paper. At the same time ,in order to encapsulate rapid manufacturing resource into Rapid Manufacturing Service Node(RMSN) ,the methods of WSDL description , service mapping and realization , service deploying are adopted and valideted in RMG.
Key words :Network Manufacturing ; Manufacturing Grid (MG) ;rapid manufacturing Grid(RMG) ;Rapid Manufacturing Service Node (RMSN)

 

1浏览PDF格式全文需要使用软件--Abode Acrobat(由于软件较大并常见,我站不提供下载)

2下载论文全文请点击鼠标右键“另存为”或使用网络蚂蚁下载(102KB)

 


本站收录的本文作者的其他论文:

1、利用CPC与VPN技术构建虚拟制造系统

2、面向企业异地协同设计与制造的MVPN的研究

3、基于CPC和MVPN的快速设计与制造一体化系统的研究

4、快速制造网格及其服务结点的建设

5、基于CPC和VPN的B2B电子商务的研究

6、自组织制造网格及其任务调度算法

 更多相关论文请点击本站的<<<站内全文搜索>>>查找

欢迎您参加讨论,发表您对此论文及其研究领域的看法!
(请在发言时在标题中使用所点评的论文的题目或研究方向,这样方便大家浏览!)

返回首页 | CIMS论文 | 并行工程 | 虚拟制造 | 敏捷制造 | 其他论文 | 项目开发 | 学术资源 | 站内全文搜索 | 免费论文网站大全 |

line.gif (4535 字节)

为了更好的为大家服务,欢迎您参加本站的投票调查

>>>>参加更多投票调查请点击!

本站永久域名:http://www.cimspaper.com欢迎访问

注意:本站内容未经书面允许不得转载

All rights reserved, all contents copyright 2000-2019
本站自2000年3月总网页访问量为