CIMS论文的天地

 

钢筋混凝土框架梁基于可靠度理论的抗震优化设计

注意:本论文已在《建筑结构》 2003,9上发表
使用者请注明论文出处

马宏旺 吕西林
(同济大学土木学院结构工程与防灾研究所,200092,上海)

摘要:针对混凝土设计规范(GB 50010-2002)中,矩形、T形和I形截面的一般框架梁抗剪设计进行可靠度评估。把梁的设计参数(混凝土强度、箍筋配筋率、钢筋强度、自重荷载效应和地震作用效应)看作随机变量,采用Monte Carlo 模拟法,得出按新规范设计不同抗震等级梁的抗剪可靠指标的变化范围。把设计参数分别看作确定性变量和随机变量,文中针对新、旧规范(GBJ10-89)的抗剪设计安全性进行了比较分析。结果表明按照新规范进行梁的抗剪设计比旧规范更安全。
关键词:钢筋混凝土梁 抗剪 可靠度 Monte Carlo模拟 

Reliability Evaluation of Seismic Shear Design for Reinforced Concrete Beams

Ma Hongwang ,  Lu Xilin
(Civil Engineering Department of Tongji University, ShangHai 200092,China)

Abstract: Reliability evaluation for seismic shear design of general reinforced concrete frame beams designed following The Code(GB 50010-2002)is finished. The design parameters such as strength of concrete, strength of steel, gravity load and earthquake action are regarded as random variables. Seismic shear reliability index of the beams is obtained by Monte Carlo simulation method. At the same time, from two aspects of determination and uncertainty, safety of seismic shear design of beams is compared between the new code(GB50010-2002) and the old code(GBJ10-89). The results indicated that shear design of beams following the new code is more safety than following the old code.
Key words: reinforced concrete beam; shear design; reliability

1浏览PDF格式全文需要使用软件--Abode Acrobat(由于软件较大并常见,我站不提供下载)

2、下载论文全文请点击鼠标右键“另存为”或使用网络蚂蚁下载(92KB)


作者点评:

 

欢迎您参加讨论,发表您对此论文及其研究领域的看法!
(请在发言时在标题中使用所点评的论文的题目或研究方向,这样方便大家浏览!)

返回首页 | CIMS论文 | 并行工程 | 虚拟制造 | 敏捷制造 | 其他论文 | 项目开发 | 学术资源 | 站内全文搜索 | 免费论文网站大全 |

line.gif (4535 字节)

为了更好的为大家服务,欢迎您参加本站的投票调查

>>>>参加更多投票调查请点击!

本站永久域名:http://www.cimspaper.com欢迎访问

注意:本站内容未经书面允许不得转载

All rights reserved, all contents copyright 2000-2019
本站自2000年3月总网页访问量为